toplogo

top版本切换

bottom

Page copyright Shanghai Pugang Machine Tool Co., Ltd. Powered by www.300.cn 沪ICP备12047293号

内页banner_产品中心

产品名称

XH-717B

没有此类产品
Features
Picture
Specifi
Case
Machine main features:
 
1.XK-717B bed and other key components are used Mihanna (bake) casting. Casting material grade is FC-30. Casting structure using one-piece molding technology, box structure, its advantages: high stability, small deformation, can effectively inhibit vibration, greatly extending the service life of machine tools. Coupled with the unique structure of the corresponding components of precision machining, heavy cutting outstanding performance. The driver The bed strictly according to the ISO static precision inspection standard organization each production process strict checks the excellence.The factory machine conforms to the national JB / T8771.2-1998 standard
 
Note: bimetal castings casting process control its application
 
  Casting process control of dense metal casting (Meehanite Metal Casting); bimetallic casting is subject to a series of stringent casting process control, such as the carbon graphite (GC) and carbon content (CC) content of the iron material control; metallurgy quality Ie Cleanness and Under Cooling degree control; Wedge Value control after inoculation with CA-SI; 5 elements, alloying elements and nitrogen (N) content Control, etc., after re-casting extremely easy to Di wave expected to wave iron base and graphite distribution, improve the mechanical properties. In addition, in order to prevent deformation after processing, the castings are completely annealed to eliminate internal stress.
 
Secret drying GC40 type (GC275) of the application
 
  Baking type GC40 most suitable for casting thickness of 10-15mm homogeneous castings. Such material structure of dense, good strength, low friction coefficient, and has self-lubricating, so the surface hardness after quenching HRC45-48, used in the metal surface friction caused by thermal shock on the workpiece, such as the machine tool Three-axis feed, countertops and so on.
 
1. The head, fuselage, saddle, base, workbench, use advanced cast iron FC-30 material, and the stress relief treatment, mechanical precision and stability, good rigidity.
 
2. Spindle head design, the use of box-type body, the internal ribs to be strengthened, high rigidity, solid, suitable for precision machining and heavy cutting.
 
3. Cooling the circulating oil, adequate circulation with efficient cooling machine, the effective control of the spindle temperature, spindle speed constant security operation. (Spindle cooling system is an optional feature)
 
4. X, Y axis with linear ball slide, with high rigidity, low noise, low friction characteristics, can do fast displacement and get the best round precision; Z-axis rails for high rigidity hard rails, and after induction hardening .
 
5. All three axes are precision ball screw preloaded with C3 double nuts. With pre-tensioned design of both ends support blocks, transmission backlash can be eliminated and errors caused by temperature rise can be compensated in advance to ensure the positioning accuracy.
 
6. The Division of the machine produced by Renishaw laser measurement test, three-axis trip for the machine parts using 100% full inspection, internal control inspection standard VDI 3441 3 σ round trip six round trip test, to eliminate the greatest extent Deviations of the machine itself to ensure the positioning accuracy of the machine.
 
7. Circular measurement test, the use of circular analyzer / Renishaw, correct roundness and machine geometry accuracy, to test to ensure the accuracy of the machine tool movement.
 
8. Box base with large span column design, greatly increasing the contact area of ​​the column and the base to enhance the design of the head support; and column with high-strength fabric reinforcement structure, the machine will be able to make the amount of distortion generated by the drop To the lowest.
 
9. Spindle cooling cycle, increase high-speed processing heat to eliminate, so that the spindle life to effectively overcome the high-speed precision machined surface of the three D-shaped position error. Span design with large precision ball bearings precision grade, high-speed high-precision design, the spindle Sword knife with a unique and stable gas pressure to promote dual role to ensure the rigid life of the spindle (spindle cooling system features optional book)
 
10. Belt drive spindle 7000, the lowest noise, minimum vibration, cutting surface optimization.
 
11. Unique tool changer, using the original German-style cam in Taiwan, the agency uses special materials, precision machining, coupled with a unique heat treatment, the tool change fast, reliable and accurate (no impact on the spindle) and smooth and noiseless.
 
12. Large-capacity magazine organization, can store 24 knives, and the latest cam-style tool change system, the magazine management using random memory, making the tool exchange quickly, safe and reliable.
 
13. Electrical box using heat exchanger, can better isolate the dust, reduce the temperature inside the box.
 
14.XK-717B has a semi-cover type cutting protective cover, optional according to the customer a number of safety requirements, such as full-cover cutting cover, electric control cabinet safety device, safety door, operating the door of the special enhanced design, two Side door sliding rail design to ensure the safety of machinery and personnel, in line with ISO9000 standards.
bbbb

The main specifications:

model

unit

XK-717B

 

Spindle

Spindle inclination

 

NO.50

Spindle features

 

Belt drive

Spindle rotation number

r.p.m.

7000

 

Workbench

Workbench area

mm

1500 x 700

T-groove

mm

18 x 5 x 135

Operating area

mm

1300 x 700

Allow load

kgs

1000

 

 

Movement and speed of movement

Xaxis

mm

1300

Yaxis

mm

700

Zaxis

mm

700

Countertop to spindle end face distance

mm

190-890

Fuselage track surface to the spindle centerline distance

mm

757

Fast-moving

m/min

X,Y24/Z18

Cutting feed movement

m/min

X,Y,Z: 1~10

Automatic tool changer

<Optional>

The number of tools

PCS

24

Cutters allow adjacent diameters (not adjacent)

∮125/∮250

The maximum tool length used

mm

300

The maximum weight of the tool

kg

15

Tool Changer

 

Tool change arm

Knife selection method

 

Shortest path selection knife

Tool change time T-T

S

4.5

motor

Spindle use

kw

11/15

X / Y / Z feed

kw

3

Used for lubrication

w

50

Cutting use

w

460/900

other

Mechanical height

mm

2,860

Mechanical area

mm

3,700 x2,950

Mechanical weight

kgs

9800

CNC controller

 

Fanuc Series 0i

Positioning accuracy / repeat positioning accuracy

mm

0.01/0.006

 

暂未实现,敬请期待
暂未实现,敬请期待