toplogo

top版本切换

bottom

Page copyright Shanghai Pugang Machine Tool Co., Ltd. Powered by www.300.cn 沪ICP备12047293号

内页banner_产品中心

产品名称

VMG-8

没有此类产品
Features
Picture
Specifi
Case
Machine main features:
 
1.VMG-8 bed and other key components are used dense bake castings. Casting material grade is FC-30. Casting structure using one-piece molding technology, box structure, its advantages: high stability, small deformation, can effectively inhibit vibration, greatly extend the service life of machine tools. Coupled with the unique structure of the corresponding precision components, cutting performance. In strict accordance with the ISO static precision test standards for the production of strict control of each process excellence. The factory machine in line with national JB / T8771.2-1998 standards
 
Note: bimetal castings casting process control its application
 
  Casting process control of dense metal casting (Meehanite Metal Casting); bimetallic casting is subject to a series of stringent casting process control, such as the carbon graphite (GC) and carbon content (CC) content of the iron material control; metallurgy quality Ie Cleanness and Under Cooling degree control; Wedge Value control after inoculation with CA-SI; 5 elements, alloying elements and nitrogen (N) content Control, etc., after re-casting extremely easy to Di wave expected to wave iron base and graphite distribution, improve the mechanical properties. In addition, in order to prevent deformation after processing, the castings are completely annealed to eliminate internal stress.
 
Secret drying GC40 type (GC275) of the application
 
  Baking type GC40 most suitable for casting thickness of 10-15mm homogeneous castings. Such material structure of dense, good strength, low coefficient of friction, and with self-lubricating, so the surface hardness after quenching HRC48-52, used in the metal surface friction caused by thermal shock on the workpiece.
 
1. The head, fuselage, saddle, base, workbench, use advanced cast iron FC-30 material, and the stress relief treatment, mechanical precision and stability, good rigidity.
 
2. Spindle head design, the use of box-type body, the internal ribs to be strengthened, the spindle rigid, stable, suitable for precision machining.
 
3. X / Y / Z axes are linear roller slide, with high rigidity, low noise, low friction characteristics, can do fast displacement and get the best round precision.
 
4. All three axes adopt precision ball screw preloaded by C3 double nuts, with pre-tensioned design of both ends support seat, it can eliminate transmission backlash and compensate the error caused by temperature rise in advance, so as to ensure the positioning accuracy.
 
5. The Division of the machine produced by Renishaw laser measurement test, three-axis travel for the machine part of the 100% full inspection, internal control inspection standard VDI 3441 3 σ round trip six round trip test, to eliminate the greatest extent Deviations of the machine itself to ensure the positioning accuracy of the machine.
 
6. Circular measurement test, the use of circularity tester / Renishaw, correct roundness and machine geometry accuracy, to test to ensure the accuracy of the machine tool movement.
 
7. Three roller rail integrated rail, heavy base with large span column design, greatly increasing the contact area of ​​the column and the base to enhance the design of the head support; bearing rigid parts with a lightweight design of moving parts will enable the machine When used, the amount of distortion produced is minimized, processing is faster, gravitational acceleration is higher.
 
8. Spindle cooling cycle, increase the high-speed heat treatment to eliminate, so that prolong the spindle life, effectively overcome the high-speed precision machining surface of the three D-shaped position error. Span design with large precision ball bearings precision grade, high-speed high-precision design, the spindle Pine knife with a unique and stable gas pressure to promote dual role to ensure the rigid life of the spindle.
 
9. Direct-driven spindle 12000rpm, greatly enhance the cutting speed. Minimum noise, minimum vibration, cutting surface optimization.
 
10 unique tool changer, the original German-style cam Taiwan, the agency uses special materials, precision machining, coupled with a unique heat treatment, the tool change fast, reliable and accurate (no impact on the spindle) and smooth and noise-free.
 
11. Large-capacity magazine organization, can store 24 knives, and the latest cam-style tool change system, the magazine management using random memory, making the tool exchange quickly, safe and reliable.
 
12. Electrical box using heat exchangers, can better control the temperature and humidity inside the box, make electrical work stable.
 
13.Z-axis without counterweight design, increase the Z-axis motor, suitable for high-speed fast moving, effectively reducing the processing vibration.
 
14. VMG-8 has a full cover cutting shield, effectively blocking splashes, leakage ensure that the user factory environmental requirements in line with ISO9000 standards.
bbbb

 

 

 

 

 

 

 

The main specifications:

Project

unit

Specifications

Workbench

working desk size

mm

450X900

T-slot number × slot width × spacing

mm

3×18×130

Workbench maximum load-bearing

kg

500

stroke

Workbench travel (X axis)

mm

800

Saddle stroke (Y-axis)

mm

500

Headstock stroke (Z axis)

mm

500

Spindle

Spindle taper

 

BT40

Spindle speed

r/min

50~12000

Spindle motor power

kw

7.5

Spindle end to table distance

mm

170-670

Spindle center to column distance

mm

524

Feed

Cutting feed rate

mm/min

1~10000

Fast moving speed X / Y / Z

mm/min

48/48/48

X / Y / Z axis motor rated power

Kw

2/2/3

X / Y / Z axis motor rated torque

N.m

13/7/13.7/22

Tool magazine

Tool magazine capacity (manipulator)

Put

24

Adjacent tool maximum tool diameter

mm

80

Interval knife maximum tool diameter

mm

150

Maximum tool length

mm

250

The maximum tool weight

kg

7

Tool change time (knife to knife)

sec

3.2

Accuracy

Positioning accuracy (full stroke)

mm

0.010

Repeated positioning accuracy (full stroke)

mm

0.006

cool down

Tool cooling pump flow

L/min

60

Tool cooling pump pressure head

Meter

12

other

Machine dimensions

mm

2400X2600(Water tank)X2100

Total machine power

Kw

18

The total weight of the machine

kg

4300kg

 

暂未实现,敬请期待
暂未实现,敬请期待