toplogo

top版本切换

bottom

Page copyright Shanghai Pugang Machine Tool Co., Ltd. Powered by www.300.cn 沪ICP备12047293号

内页banner_产品中心

产品名称

ZG-640

没有此类产品
Features
Picture
Specifi
Case
Machine main features:
 
1.ZG-640 bed and other key components are used Mihanna (bake) casting. Casting material grade is FC-30. Casting structure using one-piece molding technology, box structure, its advantages: high stability, small deformation, can effectively inhibit vibration, greatly extend the service life of machine tools. Coupled with the unique structure of the corresponding precision components, cutting performance. In strict accordance with the ISO static precision test standards for the production of strict control of each process excellence. The factory machine in line with national JB / T8771.2-1998 standards
 
Note: bimetal castings casting process control its application
 
  Casting process control of dense metal casting (Meehanite Metal Casting); bimetallic casting is subject to a series of stringent casting process control, such as the carbon graphite (GC) and carbon content (CC) content of the iron material control; metallurgy quality Ie Cleanness and Under Cooling degree control; Wedge Value control after inoculation with CA-SI; 5 elements, alloying elements and nitrogen (N) content Control, etc., after re-casting extremely easy to Di wave expected to wave iron base and graphite distribution, improve the mechanical properties. In addition, in order to prevent deformation after processing, the castings are completely annealed to eliminate internal stress.
 
Secret drying GC40 type (GC275) of the application
 
  Baking type GC40 most suitable for casting thickness of 10-15mm homogeneous castings. Such material structure of dense, good strength, low coefficient of friction, and with self-lubricating, so the surface hardness after quenching HRC48-52, used in the metal surface friction caused by thermal shock on the workpiece.
 
1. The head, fuselage, saddle, base, workbench, use advanced cast iron FC-30 material, and the stress relief treatment, mechanical precision and stability, good rigidity.
 
2. Spindle head design, the use of direct structure, the main structure of the internal ribs to be strengthened, high rigidity, solid, lightweight moving parts for precision machining and high-speed cutting.
 
3. X / Y / Z axes are linear slide, with high rigidity, low noise, low friction characteristics, can do fast displacement and get the best round precision.
 
4. All three axes adopt precision ball screw preloaded by C3 double nuts, with pre-tensioned design of both ends support seat, it can eliminate transmission backlash and compensate the error caused by temperature rise in advance, so as to ensure the positioning accuracy.
 
5. The Division of the machine produced by Renishaw laser measurement test, three-axis travel for the machine part of the 100% full inspection, internal control inspection standard VDI 3441 3 σ round trip six round trip test, to eliminate the greatest extent Deviations of the machine itself to ensure the positioning accuracy of the machine.
 
6. Circular measurement test, the use of circularity tester / Renishaw, correct roundness and machine geometry accuracy, to test to ensure the accuracy of the machine tool movement.
 
7. Three-track integrated rail with large span column design, greatly increasing the contact area of ​​the column and the base to enhance the design of the head support; and column with high strength overall structure, the machine will be able to make the use of the amount of distortion generated Minimize.
 
8 spindle adopts direct drive, high-speed tapping to overcome the slight error caused by the belt drive to ensure machining accuracy and extend tool life.
 
9. Spindle direct 15000rpm (optional spindle direct 20000rpm), the lowest noise, minimum vibration, cutting surface optimization.
 
10.Advanced tool changer, using radial tool change system, the agency uses special materials, precision machining, reliable and accurate (no impact on the spindle) Efficient spindle floating roof bar mechanical loose knife mechanism, change the knife quickly and smoothly No noise.
 
11. Large capacity magazine body, can store 16 knives, Taiwan brand tool change system, making the tool exchange quickly, safe and reliable.
 
12. Electrical box using heat exchangers, can better control the temperature and humidity inside the box, make electrical work stable.
 
13 monolithic sit with Y to the chassis slope drainage, effectively remove the processing chip.
 
14.ZG-640 has a full cover cutting shield, effectively blocking splashes, leakage ensure that the user factory environmental requirements in line with ISO9000 standards.
 
15. In order to ensure the quality of the whole machine, the main purchased parts adopt famous brand manufacturers' products:
 
  Controller: Japan's Mitsubishi M80B
 
  Hydraulic unit: Taiwan Kang World, Seven foreign (special function optional)
 
  Spindle cooling unit: Shenzhen Ruike
 
  Pressure unit: Taiwan's gold company
 
  Bearing: Japan NSK
 
  Spindle: Taiwan Rui Ying
 
  Ball screw: Taiwan Intime, on the silver
 
  Linear Slides: Taiwan Yintai, silver, German-made Rexroth, because of that
 
  Electrical components: Schneider
 
  Central lubrication system: river valley
 
  Tool on the knife: Japan Virtuous Dragon (optional)
 
  ATC: Taiwan University, St. Jie
bbbb

The main specifications:

Model

unit

ZG-540

 

Spindle

Spindle inclination

 

NO.30

Spindle features

 

Direct drive

Spindle rotation number

r.p.m.

15000/20000

 

Workbench

Workbench area

mm

400X600

T-groove

mm

3 x 14x 100

Operating area

mm

500X400

Allow load

kgs

250

 

Movement and speed of movement

X axis

mm

500

Y axis

mm

400

Z axis

mm

300

Countertop to spindle end face distance

mm

155-455

Fuselage track surface to the spindle centerline distance

mm

450

Fast-moving

m/min

X,Y,Z/42

Cutting feed movement

m/min

X,Y,Z: 1~10

Automatic tool changer

Knife type

 

BT-30

Pull the cutter type

 

MAS P30T-1 45°

The number of tools

PCS

16

The maximum allowable diameter <adjacent>

mm

Φ90

The maximum allowable diameter <non-adjacent>

mm

Φ150

The maximum allowable length of the knife

mm

150

The knife allows the maximum weight

KG

3

Knife selection method

 

Shortest path selection knife

Tool change time <T-T>

second

1.7

 

motor

Spindle use

kw(NM)

5.5

X / Y / Z feed

kw

1.5/1.5/3

Used for lubrication

w

50

Cutting use

w

460/900

 

other

Mechanical height

mm

2090

Mechanical area

mm

1900 x2300

Mechanical weight

kgs

3500

CNC controller

 

Mitsubishi

Positioning accuracy / repeat positioning accuracy

mm

0.008/0.004

           

 

暂未实现,敬请期待
暂未实现,敬请期待